Note
VE6120K and VE6125K use separate deployment raw images. You cannot upgrade from VE6120K to VE6125K.Note
You only need to deploy raw images when you first create the appliance VM. All subsequent upgrades can be performed using the standard controller upgrade procedure to apply a .dve file to the VE6120K appliance and .mfe file for the VE6125K appliance.In addition, the appliances are configured with one Ethernet interface for administration and two data plane Ethernet interfaces for forwarding payload traffic.
The best practice is to connect them to separate bridges in the host server.
| Extreme Application | VE6120K | VE6125K | ||
|---|---|---|---|---|
| Small | Medium | Large | XLarge | |
| Total APs managed in Standalone mode | 50 | 250 | 500 | 2000 |
| Additional APs supported in high-availability mode | 50 | 250 | 500 | 2000 |
| Total managed APs per Appliance Pair | 100 | 500 | 1000 | 4000 |
| Total Switches managed per Appliance | 50/100 | 100/200 | 200/400 | 200/400 |
| Total simultaneous users in Standalone mode | 1,000 | 4,000 | 8,000 | 16000 |
| Additional simultaneous users in high-availability mode | 1,000 | 4,000 | 8,000 | 16000 |
| Total Simultaneous Users per Appliance Pair | 2,000 | 8,000 | 16,000 | 32000 |
| Hardware Requirements | ||||
| CPU | 4 | 6 | 8 | 20 Cores |
| RAM (GB) | 8 | 16 | 24 | 32 |
| Hard Disk (GB) | 80 | 80 | 80 | 250 |